Saturday, January 25, 2014
Unique Book Display and Storage
Designed for a child, this book rack features scallop sides, wainscot back and spindle cross-bars. The rack could also be for adults to store magazines, or to be used in a physicians waiting room. Endless design possibilties make this book rack your personal library.
Friday, January 24, 2014
Kitty
Quando realizei esta pattern, sinceramente não tive a noção da beleza em que se iria transformar este trabalho. Partilhei esta pattern com alguns amigos e houve quem resolve-se realizar este projecto.
Quando fui confrontado com o resultado final, confesso fiquei maravilhado. Passou então a ser minha prioridade realizar este trabalho.
Este trabalho tem cerca de quatrocentos cortes individuais e demorou cerca de oito horas a realizar.
A moldura foi tambem por mim feita por mim, realizada em madeira de pinho e acabada com velatura casca de noz e cera de polir para finalizar.
Dimenções do retrato, 45X35 cm.
Este trabalho está disponivel para venda pela quantia de 75 Euros.
Obrigado
Quando fui confrontado com o resultado final, confesso fiquei maravilhado. Passou então a ser minha prioridade realizar este trabalho.
Este trabalho tem cerca de quatrocentos cortes individuais e demorou cerca de oito horas a realizar.
A moldura foi tambem por mim feita por mim, realizada em madeira de pinho e acabada com velatura casca de noz e cera de polir para finalizar.
Dimenções do retrato, 45X35 cm.
Este trabalho está disponivel para venda pela quantia de 75 Euros.
Obrigado
The Unplugged Summer Part Two
Drilling Holes in a Perfectly Fine Bench Top
Drilling holes in a perfectly fine bench top can be as scary as you make it; Ive been using this style bench at my shop in Toronto and have come to find Im much more comfortable hand planing stock with it sitting freely on the bench top surface butted up against a thin baton of hardwood. No tail vise or hold-fasts just the weight and the balance of my arms and the hand plane working together. (There are of course exceptions with this rule like cross grain work with a scrub plane) This, my summer bench has never been equipped with dog holes so now, before I get any further along with this dovetailed box project Ill need to get out the brace and bit and make some cheese.
In the shot above you can see where I placed my bench dog holes; this is my comfort zone and its what works for me. Id suggest clamping a baton across your bench top and see wheres right for you. Maybe clamping a baton across the bench will always be enough for you and youll never have to scar your work bench...in my world I dont mind a few holes in the work surface.
So with that I carefully draw a square line and mark with an awl the locations. I also mark off a hole in the block on my front shoulder vise; this is used sometimes to hold small pieces across the bench top. Ill probably add three more holes in line with the left hand side of the vise, but for today these three will suffice. (Make sure before you start boring youre not in line with the vice bolt or screw!!)
Im using a couple of Bench Pups from Veritas; theyre the round brass type 2 3/8" long. I also use a pair of the 4 3/8" ones but theyre still sitting all snug in the holes on my bench top back in the city.
With the third hole drilled Im ready to get back to work and surfacing the four pieces of the project is next on the list. As mentioned Ill lay a thin baton of hardwood across the bench top and work the boards flat, checking as I go.
My shop made winding sticks also made the journey home and theyre the perfect tool for the job of checking this Khaya for any humps, valleys or wind.
In no time at all Im back on the shooting board taking incredible shavings in the end grain. The 5 1/2 is a wonderful shooting plane and this minimal shooting board is working out better than I anticipated. (Just to answer the inevitable now instead of later...no-I wont be getting rid of my fancy shooting board back in Toronto nor will I stop using my dedicated No. 9 Iron Miter plane! This is good and working well but that duo are the cats ass when shooting)
Four pieces, square and smooth Ill sit them on the bench top and take a few steps back. Im already thinking about adding to the design, perhaps a small frame to hold the carcass? Theres still some long skinny strips of Khaya and will think more of the piece while Im marking out the dovetails.
The Tite-Mark again finds its way into my hand- this time the perfect application. Im laying out simple through dovetails, nothing too fancy, I am still on vacation over here!
I like to clamp both pieces together when I lay out my tails as seen in the next photo below...This will obviously insure continuity between the top and the bottom and will speed up the process a little as well.
I walk the dividers across the tail board and draw in the lines with a pencil and my dovetail marker. Youll notice that I divide the board into seven even sections and then when I start sawing Ill skip the middle one. This is something Ive been doing lately, (perhaps a nod to my Krenov admiration?) I love the look the two trios of tails make. (my tool chest and small wall cabinet I made for my book projects also had this same treatment) With that its time to cut dovetails and my small rip saw seems to really like this hardwood. Khaya is a great wood for hand tool work except sometimes when hand planing. The ribbons in the wood grain can reverse and bend which in turn can result in tear-out. This is easily remedied by some sanding in the final stages but Im hoping to avoid it if I can.
The tails are cut first in my world but you can start with the pins if youre so inclined. From dovetail saw to fret saw I wander and in no time at all Im reaching for some chisels to clean out the waste. My detail chisels which I cant say enough about are always close by.
With the tails cut and clean its a good time to break for the night; were having a campfire and I better get some kindling together. The beauty of the wood shop-always lots of waste to get a good campfire going...
...Morning comes fast and first up is to transfer the tails over to my pin board; I use a thin Paul Bebee knife to reach deep into the corners. You may have noticed I didnt use the 140 trick when beginning these dovetails Im not sure why I didnt other than to say I may have been thinking this little project was destined for the wood shop. If this was a drawer for a client then I would have cut the shallow rabbets into the inside end of the tail board to make life easier when transferring the lines over. (if youve never heard of the 140 trick then you have some homework for tonight...look back through my older posts to find the method)
Again from the dovetail saw to fret saw dance Im back to the chiseling and ready for a dry fit.
At this point the box is ready for glue; Ive been thinking about the long strips of Khaya left in the off cut pile. Maybe a frame assembly to cradle the box? A trestle type affair dictated by the stock in question. In my work space Im able to create and design without any guidelines or rules save the lumber Ive chosen (perhaps foolishly) to work with. Sometimes the pencil and paper are better left on the shelf and we can meander through this creative process with only the wood to guide us. It can be quite liberating stumbling through a building process when time is our only real investment. Ive been enjoying myself over these past two days and really most of my time was given to setting up the work space. The hardwood owes me nothing but Im going to do my best to lure it into some form I can call my own. A cantilevered box over a thin double trestle?
This evening Ill do some more measuring and continue a little further on, down the path.
For now though...theres an old crow waiting hungrily, from his perch in yonder tree...
Read More..
Drilling holes in a perfectly fine bench top can be as scary as you make it; Ive been using this style bench at my shop in Toronto and have come to find Im much more comfortable hand planing stock with it sitting freely on the bench top surface butted up against a thin baton of hardwood. No tail vise or hold-fasts just the weight and the balance of my arms and the hand plane working together. (There are of course exceptions with this rule like cross grain work with a scrub plane) This, my summer bench has never been equipped with dog holes so now, before I get any further along with this dovetailed box project Ill need to get out the brace and bit and make some cheese.
In the shot above you can see where I placed my bench dog holes; this is my comfort zone and its what works for me. Id suggest clamping a baton across your bench top and see wheres right for you. Maybe clamping a baton across the bench will always be enough for you and youll never have to scar your work bench...in my world I dont mind a few holes in the work surface.
So with that I carefully draw a square line and mark with an awl the locations. I also mark off a hole in the block on my front shoulder vise; this is used sometimes to hold small pieces across the bench top. Ill probably add three more holes in line with the left hand side of the vise, but for today these three will suffice. (Make sure before you start boring youre not in line with the vice bolt or screw!!)
Im using a couple of Bench Pups from Veritas; theyre the round brass type 2 3/8" long. I also use a pair of the 4 3/8" ones but theyre still sitting all snug in the holes on my bench top back in the city.
With the third hole drilled Im ready to get back to work and surfacing the four pieces of the project is next on the list. As mentioned Ill lay a thin baton of hardwood across the bench top and work the boards flat, checking as I go.
My shop made winding sticks also made the journey home and theyre the perfect tool for the job of checking this Khaya for any humps, valleys or wind.
In no time at all Im back on the shooting board taking incredible shavings in the end grain. The 5 1/2 is a wonderful shooting plane and this minimal shooting board is working out better than I anticipated. (Just to answer the inevitable now instead of later...no-I wont be getting rid of my fancy shooting board back in Toronto nor will I stop using my dedicated No. 9 Iron Miter plane! This is good and working well but that duo are the cats ass when shooting)
Four pieces, square and smooth Ill sit them on the bench top and take a few steps back. Im already thinking about adding to the design, perhaps a small frame to hold the carcass? Theres still some long skinny strips of Khaya and will think more of the piece while Im marking out the dovetails.
The Tite-Mark again finds its way into my hand- this time the perfect application. Im laying out simple through dovetails, nothing too fancy, I am still on vacation over here!
I like to clamp both pieces together when I lay out my tails as seen in the next photo below...This will obviously insure continuity between the top and the bottom and will speed up the process a little as well.
I walk the dividers across the tail board and draw in the lines with a pencil and my dovetail marker. Youll notice that I divide the board into seven even sections and then when I start sawing Ill skip the middle one. This is something Ive been doing lately, (perhaps a nod to my Krenov admiration?) I love the look the two trios of tails make. (my tool chest and small wall cabinet I made for my book projects also had this same treatment) With that its time to cut dovetails and my small rip saw seems to really like this hardwood. Khaya is a great wood for hand tool work except sometimes when hand planing. The ribbons in the wood grain can reverse and bend which in turn can result in tear-out. This is easily remedied by some sanding in the final stages but Im hoping to avoid it if I can.
The tails are cut first in my world but you can start with the pins if youre so inclined. From dovetail saw to fret saw I wander and in no time at all Im reaching for some chisels to clean out the waste. My detail chisels which I cant say enough about are always close by.
With the tails cut and clean its a good time to break for the night; were having a campfire and I better get some kindling together. The beauty of the wood shop-always lots of waste to get a good campfire going...
...Morning comes fast and first up is to transfer the tails over to my pin board; I use a thin Paul Bebee knife to reach deep into the corners. You may have noticed I didnt use the 140 trick when beginning these dovetails Im not sure why I didnt other than to say I may have been thinking this little project was destined for the wood shop. If this was a drawer for a client then I would have cut the shallow rabbets into the inside end of the tail board to make life easier when transferring the lines over. (if youve never heard of the 140 trick then you have some homework for tonight...look back through my older posts to find the method)
Again from the dovetail saw to fret saw dance Im back to the chiseling and ready for a dry fit.
At this point the box is ready for glue; Ive been thinking about the long strips of Khaya left in the off cut pile. Maybe a frame assembly to cradle the box? A trestle type affair dictated by the stock in question. In my work space Im able to create and design without any guidelines or rules save the lumber Ive chosen (perhaps foolishly) to work with. Sometimes the pencil and paper are better left on the shelf and we can meander through this creative process with only the wood to guide us. It can be quite liberating stumbling through a building process when time is our only real investment. Ive been enjoying myself over these past two days and really most of my time was given to setting up the work space. The hardwood owes me nothing but Im going to do my best to lure it into some form I can call my own. A cantilevered box over a thin double trestle?
This evening Ill do some more measuring and continue a little further on, down the path.
For now though...theres an old crow waiting hungrily, from his perch in yonder tree...
Thursday, January 23, 2014
Large Fretwork Stencil Now Available
Just wanted to stop in and let you know that I finally figured out how to produce my larger fretwork stencil! The finished shape is 32"x32" (same size as photo). Since it is so large, I decided to make the stencil half of the shape so that it is easier to handle, then you flip it over to finish the shape. I currently have 12 available to you first before I put it on Etsy.
Ill also have more in the fall after we move, so more to come!
If youre interested, leave a comment or send an email to sarahmdorseydesigns{@}gmail{.}com. They are $45 + $7 shipping, payment available through Paypal.
Read More..
Ill also have more in the fall after we move, so more to come!
If youre interested, leave a comment or send an email to sarahmdorseydesigns{@}gmail{.}com. They are $45 + $7 shipping, payment available through Paypal.
Happy Wednesday! :)
Deardorf Camera Repair
well, we have put our toes into what i would imagine to be an extremely teeny tiny niche market ... we have a friend, george bouret, who is a professional photographer and gallery owner in pawlet, vt. he bought a new lens for his antique deardorf view camera. it had a different focal length from most other lenses used on this type of camera so he needed a holder that would position the new lens one inch closer to the film. will whipped up the new one and after a little fine tuning ... (angling the bottom slightly as the holder had to swing into the opening because the top metal holder was fixed) off he went ... i dont expect much repeat business on this one but george says even the normal replacement lens boards are hard to find and really expensive if you can find them .... who knows ... maybe well be retiring soon after all ... ahhhh, just kidding ... what would i have to write about then? click the photos to enlarge them ... 
original on the right ..
new one on the left, before modification ... good to go now ...Wednesday, January 22, 2014
The Partners Desk Leaves Tomorrow
Well, the house is finally finished and the desk will be on its way to its new home tomorrow. We finished it up a few weeks ago but we were waiting for the carpenters to finish, the hardware to arrive and the ok for delivery. All set now and ready to go except for a small adjustment that I see I need to make to the bottom file drawer face ... Its amazing what you dont see until you look at the photographs closely. Anyway ... no problem well take care of it in the morning before the shipper arrives ... A nice use of the 30" wide mahogany boards, if I do say so myself ... Good job boys .... Click the photos to enlarge them ...
Close up of the very nice handmade hardware by Richard Spreda, The Stowe Smith/
Drawers like this on both sides, 3/16ths by 1/2" brass hanging file supports in the bottom drawers. There is also a removable butterfly grommet (not shown in the file) for cord passage to the surge protector in the center below the kneehole ... The cord from that travels between the drawers and plugs into the wall that the desk will be placed up against ... More drawings, comments and construction photos from the original post here ...Tuesday, January 21, 2014
Get woodworking on sims freeplay
This woodworking on sims freeplay must try
Sims freeplay tips: hobbies: woodworking, Tips on the game "the sims freeplay". available for certain android and ios (apple) devices.. The sims freeplay - the sims wiki, Trivia edit. the sims freeplay is the third game in the sims series to require an internet connection (the first is the sims online and the second being the sims social)..
Woodworking | fine woodworking & carpentry | a resource, Woodworking news is a resource for woodworkers and carpenters of all skill levels. shop online for woodworking supplies, woodworking tools and woodworking plans.. The sims 3., I feel dumb for just now noticing this, but for some reason, whenever i try to close up on an area around a staircase, the ceiling disappears, in a about a 2-4 tile. Wcif sims, Announcement tags have been changed so community members can now tag posts using the existing tags. if you find you need a new tag creation, you still need to get one. The sims 2, I know i had a post on here about downloading zip and rar but for the life of me can't find iti know i swore i would never ever download things again for my sims2. Sims freeplay tips: hobbies: overview, Tips on the game "the sims freeplay". available for certain android and ios (apple) devices.. Fancy software, Fancy software - free, full version, registered, cracked, software, antivirus, graphics, portable software, download managers, converters, games,.
woodworking on sims freeplay its good
woodworking on sims freeplay ,
Subscribe to:
Posts (Atom)